Explore and Plot by Vector Layer Attributes

Last updated on 2023-11-21 | Edit this page

Estimated time: 60 minutes

Overview

Questions

  • How can I compute on the attributes of a spatial object?

Objectives

  • Query attributes of a spatial object.
  • Subset spatial objects using specific attribute values.
  • Plot a vector feature, colored by unique attribute values.

Things You’ll Need To Complete This Episode

See the lesson homepage for detailed information about the software, data, and other prerequisites you will need to work through the examples in this episode.

This episode continues our discussion of vector layer attributes and covers how to work with vector layer attributes in R. It covers how to identify and query layer attributes, as well as how to subset features by specific attribute values. Finally, we will learn how to plot a feature according to a set of attribute values.

Load the Data


We will continue using the sf, terra and ggplot2 packages in this episode. Make sure that you have these packages loaded. We will continue to work with the three ESRI shapefiles (vector layers) that we loaded in the Open and Plot Vector Layers in R episode.

Query Vector Feature Metadata


As we discussed in the Open and Plot Vector Layers in R episode, we can view metadata associated with an R object using:

  • st_geometry_type() - The type of vector data stored in the object.
  • nrow() - The number of features in the object
  • st_bbox() - The spatial extent (geographic area covered by) of the object.
  • st_crs() - The CRS (spatial projection) of the data.

We started to explore our point_HARV object in the previous episode. To see a summary of all of the metadata associated with our point_HARV object, we can view the object with View(point_HARV) or print a summary of the object itself to the console.

R

point_HARV

OUTPUT

Simple feature collection with 1 feature and 14 fields
Geometry type: POINT
Dimension:     XY
Bounding box:  xmin: 732183.2 ymin: 4713265 xmax: 732183.2 ymax: 4713265
Projected CRS: WGS 84 / UTM zone 18N
  Un_ID Domain DomainName       SiteName Type       Sub_Type     Lat      Long
1     A      1  Northeast Harvard Forest Core Advanced Tower 42.5369 -72.17266
  Zone  Easting Northing                Ownership    County annotation
1   18 732183.2  4713265 Harvard University, LTER Worcester         C1
                  geometry
1 POINT (732183.2 4713265)

We can use the ncol function to count the number of attributes associated with a spatial object too. Note that the geometry is just another column and counts towards the total.

R

ncol(lines_HARV)

OUTPUT

[1] 16

We can view the individual name of each attribute using the names() function in R:

R

names(lines_HARV)

OUTPUT

 [1] "OBJECTID_1" "OBJECTID"   "TYPE"       "NOTES"      "MISCNOTES" 
 [6] "RULEID"     "MAPLABEL"   "SHAPE_LENG" "LABEL"      "BIKEHORSE" 
[11] "RESVEHICLE" "RECMAP"     "Shape_Le_1" "ResVehic_1" "BicyclesHo"
[16] "geometry"  

We could also view just the first 6 rows of attribute values using the head() function to get a preview of the data:

R

head(lines_HARV)

OUTPUT

Simple feature collection with 6 features and 15 fields
Geometry type: MULTILINESTRING
Dimension:     XY
Bounding box:  xmin: 730741.2 ymin: 4712685 xmax: 732232.3 ymax: 4713726
Projected CRS: WGS 84 / UTM zone 18N
  OBJECTID_1 OBJECTID       TYPE             NOTES MISCNOTES RULEID
1         14       48 woods road Locust Opening Rd      <NA>      5
2         40       91   footpath              <NA>      <NA>      6
3         41      106   footpath              <NA>      <NA>      6
4        211      279 stone wall              <NA>      <NA>      1
5        212      280 stone wall              <NA>      <NA>      1
6        213      281 stone wall              <NA>      <NA>      1
           MAPLABEL SHAPE_LENG             LABEL BIKEHORSE RESVEHICLE RECMAP
1 Locust Opening Rd 1297.35706 Locust Opening Rd         Y         R1      Y
2              <NA>  146.29984              <NA>         Y         R1      Y
3              <NA>  676.71804              <NA>         Y         R2      Y
4              <NA>  231.78957              <NA>      <NA>       <NA>   <NA>
5              <NA>   45.50864              <NA>      <NA>       <NA>   <NA>
6              <NA>  198.39043              <NA>      <NA>       <NA>   <NA>
  Shape_Le_1                            ResVehic_1                  BicyclesHo
1 1297.10617    R1 - All Research Vehicles Allowed Bicycles and Horses Allowed
2  146.29983    R1 - All Research Vehicles Allowed Bicycles and Horses Allowed
3  676.71807 R2 - 4WD/High Clearance Vehicles Only Bicycles and Horses Allowed
4  231.78962                                  <NA>                        <NA>
5   45.50859                                  <NA>                        <NA>
6  198.39041                                  <NA>                        <NA>
                        geometry
1 MULTILINESTRING ((730819.2 ...
2 MULTILINESTRING ((732040.2 ...
3 MULTILINESTRING ((732057 47...
4 MULTILINESTRING ((731903.6 ...
5 MULTILINESTRING ((732039.1 ...
6 MULTILINESTRING ((732056.2 ...

Challenge: Attributes for Different Spatial Classes

Explore the attributes associated with the point_HARV and aoi_boundary_HARV spatial objects.

  1. How many attributes does each have?

  2. Who owns the site in the point_HARV data object?

  3. Which of the following is NOT an attribute of the point_HARV data object?

  1. Latitude B) County C) Country
  1. To find the number of attributes, we use the ncol() function:

R

ncol(point_HARV)

OUTPUT

[1] 15

R

ncol(aoi_boundary_HARV)

OUTPUT

[1] 2
  1. Ownership information is in a column named Ownership:

R

point_HARV$Ownership

OUTPUT

[1] "Harvard University, LTER"
  1. To see a list of all of the attributes, we can use the names() function:

R

names(point_HARV)

OUTPUT

 [1] "Un_ID"      "Domain"     "DomainName" "SiteName"   "Type"      
 [6] "Sub_Type"   "Lat"        "Long"       "Zone"       "Easting"   
[11] "Northing"   "Ownership"  "County"     "annotation" "geometry"  

“Country” is not an attribute of this object.

Explore Values within One Attribute


We can explore individual values stored within a particular attribute. Comparing attributes to a spreadsheet or a data frame, this is similar to exploring values in a column. We did this with the gapminder dataframe in an earlier lesson. For spatial objects, we can use the same syntax: objectName$attributeName.

We can see the contents of the TYPE field of our lines feature:

R

lines_HARV$TYPE

OUTPUT

 [1] "woods road" "footpath"   "footpath"   "stone wall" "stone wall"
 [6] "stone wall" "stone wall" "stone wall" "stone wall" "boardwalk" 
[11] "woods road" "woods road" "woods road"

To see only unique values within the TYPE field, we can use the unique() function for extracting the possible values of a character variable (R also is able to handle categorical variables called factors; we worked with factors a little bit in an earlier lesson.

R

unique(lines_HARV$TYPE)

OUTPUT

[1] "woods road" "footpath"   "stone wall" "boardwalk" 

Subset Features

We can use the filter() function from dplyr that we worked with in an earlier lesson to select a subset of features from a spatial object in R, just like with data frames.

For example, we might be interested only in features that are of TYPE “footpath”. Once we subset out this data, we can use it as input to other code so that code only operates on the footpath lines.

R

footpath_HARV <- lines_HARV %>%
  filter(TYPE == "footpath")
nrow(footpath_HARV)

OUTPUT

[1] 2

Our subsetting operation reduces the features count to 2. This means that only two feature lines in our spatial object have the attribute TYPE == footpath. We can plot only the footpath lines:

R

ggplot() +
  geom_sf(data = footpath_HARV) +
  ggtitle("NEON Harvard Forest Field Site", subtitle = "Footpaths") +
  coord_sf()
Map of the footpaths in the study area.
Map of the footpaths in the study area.

There are two features in our footpaths subset. Why does the plot look like there is only one feature? Let’s adjust the colors used in our plot. If we have 2 features in our vector object, we can plot each using a unique color by assigning a column name to the color aesthetic (color =). We use the syntax aes(color = ) to do this. We can also alter the default line thickness by using the size = parameter, as the default value of 0.5 can be hard to see. Note that size is placed outside of the aes() function, as we are not connecting line thickness to a data variable.

R

ggplot() +
  geom_sf(data = footpath_HARV, aes(color = factor(OBJECTID)), size = 1.5) +
  labs(color = 'Footpath ID') +
  ggtitle("NEON Harvard Forest Field Site", subtitle = "Footpaths") +
  coord_sf()
Map of the footpaths in the study area where each feature is colored differently.
Map of the footpaths in the study area where each feature is colored differently.

Now, we see that there are in fact two features in our plot!

Challenge: Subset Spatial Line Objects Part 1

Subset out all boardwalk from the lines layer and plot it.

First we will save an object with only the boardwalk lines:

R

boardwalk_HARV <- lines_HARV %>%
  filter(TYPE == "boardwalk")

Let’s check how many features there are in this subset:

R

nrow(boardwalk_HARV)

OUTPUT

[1] 1

Now let’s plot that data:

R

ggplot() +
  geom_sf(data = boardwalk_HARV, size = 1.5) +
  ggtitle("NEON Harvard Forest Field Site", subtitle = "Boardwalks") +
  coord_sf()
Map of the boardwalks in the study area.
Map of the boardwalks in the study area.

Challenge: Subset Spatial Line Objects Part 2

Subset out all stone wall features from the lines layer and plot it. For each plot, color each feature using a unique color.

First we will save an object with only the stone wall lines and check the number of features:

R

stoneWall_HARV <- lines_HARV %>%
  filter(TYPE == "stone wall")
nrow(stoneWall_HARV)

OUTPUT

[1] 6

Now we can plot the data:

R

ggplot() +
  geom_sf(data = stoneWall_HARV, aes(color = factor(OBJECTID)), size = 1.5) +
  labs(color = 'Wall ID') +
  ggtitle("NEON Harvard Forest Field Site", subtitle = "Stonewalls") +
  coord_sf()
Map of the stone walls in the study area where each feature is colored differently.
Map of the stone walls in the study area where each feature is colored differently.

Customize Plots


In the examples above, ggplot() automatically selected colors for each line based on a default color order. If we don’t like those default colors, we can create a vector of colors - one for each feature.

First we will check how many unique levels our factor has:

R

unique(lines_HARV$TYPE)

OUTPUT

[1] "woods road" "footpath"   "stone wall" "boardwalk" 

Then we can create a palette of four colors, one for each feature in our vector object.

R

road_colors <- c("blue", "green", "navy", "purple")

We can tell ggplot to use these colors when we plot the data.

R

ggplot() +
  geom_sf(data = lines_HARV, aes(color = TYPE)) +
  scale_color_manual(values = road_colors) +
  labs(color = 'Road Type') +
  ggtitle("NEON Harvard Forest Field Site", subtitle = "Roads & Trails") +
  coord_sf()
Roads and trails in the area.
Roads and trails in the area.

Adjust Line Width

We adjusted line width universally earlier. If we want a unique line width for each level or attribute category in our spatial object, we can use the same syntax that we used for colors, above.

We already know that we have four different TYPEs in the lines_HARV object, so we will set four different line widths.

R

line_widths <- c(1, 2, 3, 4)

We can use those line widths when we plot the data.

R

ggplot() +
  geom_sf(data = lines_HARV, aes(color = TYPE, size = TYPE)) +
  scale_color_manual(values = road_colors) +
  labs(color = 'Road Type') +
  scale_size_manual(values = line_widths) +
  ggtitle("NEON Harvard Forest Field Site",
          subtitle = "Roads & Trails - Line width varies") +
  coord_sf()
Roads and trails in the area demonstrating how to use different line thickness and colors.
Roads and trails in the area demonstrating how to use different line thickness and colors.

Challenge: Plot Line Width by Attribute

In the example above, we set the line widths to be 1, 2, 3, and 4. Because R orders alphabetically by default, this gave us a plot where woods roads (the last type) were the thickest and boardwalks were the thinnest.

Let’s create another plot where we show the different line types with the following thicknesses:

  1. woods road size = 6
  2. boardwalks size = 1
  3. footpath size = 3
  4. stone wall size = 2

First we need to look at the levels of our factor to see what order the road types are in:

R

unique(lines_HARV$TYPE)

OUTPUT

[1] "woods road" "footpath"   "stone wall" "boardwalk" 

We then can create our line_width vector setting each of the levels to the desired thickness.

R

line_width <- c(1, 3, 2, 6)

Now we can create our plot.

R

ggplot() +
  geom_sf(data = lines_HARV, aes(size = TYPE)) +
  scale_size_manual(values = line_width) +
  ggtitle("NEON Harvard Forest Field Site",
          subtitle = "Roads & Trails - Line width varies") +
  coord_sf()
Roads and trails in the area with different line thickness for each type of paths.
Roads and trails in the area with different line thickness for each type of paths.

Add Plot Legend

We can add a legend to our plot too. When we add a legend, we use the following elements to specify labels and colors:

  • bottomright: We specify the location of our legend by using a default keyword. We could also use top, topright, etc.
  • levels(objectName$attributeName): Label the legend elements using the categories of levels in an attribute (e.g., levels(lines_HARV$TYPE) means use the levels boardwalk, footpath, etc).
  • fill =: apply unique colors to the boxes in our legend. palette() is the default set of colors that R applies to all plots.

Let’s add a legend to our plot. We will use the road_colors object that we created above to color the legend. We can customize the appearance of our legend by manually setting different parameters.

R

ggplot() +
  geom_sf(data = lines_HARV, aes(color = TYPE), size = 1.5) +
  scale_color_manual(values = road_colors) +
  labs(color = 'Road Type') +
  ggtitle("NEON Harvard Forest Field Site",
          subtitle = "Roads & Trails - Default Legend") +
  coord_sf()
Roads and trails in the study area using thicker lines than the previous figure.
Roads and trails in the study area using thicker lines than the previous figure.

We can change the appearance of our legend by manually setting different parameters.

  • legend.text: change the font size
  • legend.box.background: add an outline box

R

ggplot() +
  geom_sf(data = lines_HARV, aes(color = TYPE), size = 1.5) +
  scale_color_manual(values = road_colors) +
  labs(color = 'Road Type') +
  theme(legend.text = element_text(size = 20),
        legend.box.background = element_rect(size = 1)) +
  ggtitle("NEON Harvard Forest Field Site",
          subtitle = "Roads & Trails - Modified Legend") +
  coord_sf()

WARNING

Warning: The `size` argument of `element_rect()` is deprecated as of ggplot2 3.4.0.
ℹ Please use the `linewidth` argument instead.
This warning is displayed once every 8 hours.
Call `lifecycle::last_lifecycle_warnings()` to see where this warning was
generated.
Map of the paths in the study area with large-font and border around the legend.
Map of the paths in the study area with large-font and border around the legend.

R

new_colors <- c("springgreen", "blue", "magenta", "orange")

ggplot() +
  geom_sf(data = lines_HARV, aes(color = TYPE), size = 1.5) +
  scale_color_manual(values = new_colors) +
  labs(color = 'Road Type') +
  theme(legend.text = element_text(size = 20),
        legend.box.background = element_rect(size = 1)) +
  ggtitle("NEON Harvard Forest Field Site",
          subtitle = "Roads & Trails - Pretty Colors") +
  coord_sf()
Map of the paths in the study area using a different color palette.
Map of the paths in the study area using a different color palette.

Data Tip

You can modify the default R color palette using the palette method. For example palette(rainbow(6)) or palette(terrain.colors(6)). You can reset the palette colors using palette("default")!

You can also use colorblind-friendly palettes such as those in the viridis package.

Challenge: Plot Lines by Attribute

Create a plot that emphasizes only roads where bicycles and horses are allowed. To emphasize this, make the lines where bicycles are not allowed THINNER than the roads where bicycles are allowed. NOTE: this attribute information is located in the lines_HARV$BicyclesHo attribute.

Be sure to add a title and legend to your map. You might consider a color palette that has all bike/horse-friendly roads displayed in a bright color. All other lines can be black.

First we need to make sure that the BicyclesHo attribute is a factor and check how many levels it has.

R

lines_HARV$BicyclesHo <- as.factor(lines_HARV$BicyclesHo)
class(lines_HARV$BicyclesHo)

OUTPUT

[1] "factor"

R

levels(lines_HARV$BicyclesHo)

OUTPUT

[1] "Bicycles and Horses Allowed"     "Bicycles and Horses NOT ALLOWED"
[3] "DO NOT SHOW ON REC MAP"         

Next, we will create a new object lines_removeNA that removes missing values.

R

lines_removeNA <- lines_HARV[!is.na(lines_HARV$BicyclesHo),]

In our plot, we will set colors so that only the allowed roads are magenta, and we will set line width so that the first factor level is thicker than the others.

R

# First, create a data frame with only those roads where bicycles and horses
# are allowed
lines_showHarv <-
  lines_removeNA %>%
  filter(BicyclesHo == "Bicycles and Horses Allowed")

# Next, visualise using ggplot
ggplot() +
  geom_sf(data = lines_HARV) +
  geom_sf(data = lines_showHarv, aes(color = BicyclesHo), size = 2) +
  scale_color_manual(values = "magenta") +
  ggtitle("NEON Harvard Forest Field Site",
          subtitle = "Roads Where Bikes and Horses Are Allowed") +
  coord_sf()
Roads and trails in the area highlighting paths where horses and bikes are allowed.
Roads and trails in the area highlighting paths where horses and bikes are allowed.

Challenge: Plot Polygon by Attribute

  1. Create a map of the state boundaries in the United States using the data located in your downloaded data folder: NEON-DS-Site-Layout-Files/US-Boundary-Layers\US-State-Boundaries-Census-2014. Apply a line color to each state using its region value. Add a legend.

First we read in the data and check how many levels there are in the region column:

R

state_boundary_US <-
st_read("data/NEON-DS-Site-Layout-Files/US-Boundary-Layers/US-State-Boundaries-Census-2014.shp") %>%
# NOTE: We need neither Z nor M coordinates!
st_zm()

OUTPUT

Reading layer `US-State-Boundaries-Census-2014' from data source 
  `/home/runner/work/r-raster-vector-geospatial/r-raster-vector-geospatial/site/built/data/NEON-DS-Site-Layout-Files/US-Boundary-Layers/US-State-Boundaries-Census-2014.shp' 
  using driver `ESRI Shapefile'
Simple feature collection with 58 features and 10 fields
Geometry type: MULTIPOLYGON
Dimension:     XYZ
Bounding box:  xmin: -124.7258 ymin: 24.49813 xmax: -66.9499 ymax: 49.38436
z_range:       zmin: 0 zmax: 0
Geodetic CRS:  WGS 84

R

state_boundary_US$region <- as.factor(state_boundary_US$region)
levels(state_boundary_US$region)

OUTPUT

[1] "Midwest"   "Northeast" "Southeast" "Southwest" "West"     

Next we set a color vector with that many items:

R

colors <- c("purple", "springgreen", "yellow", "brown", "navy")

Now we can create our plot:

R

ggplot() +
  geom_sf(data = state_boundary_US, aes(color = region), size = 1) +
  scale_color_manual(values = colors) +
  ggtitle("Contiguous U.S. State Boundaries") +
  coord_sf()
Map of the continental United States where the state lines are colored by region.
Map of the continental United States where the state lines are colored by region.

Key Points

  • Spatial objects in sf are similar to standard data frames and can be manipulated using the same functions.
  • Almost any feature of a plot can be customized using the various functions and options in the ggplot2 package.